Solution calorimetry: A novel perspective into the dissolution process of food powders

The enthalpy of dissolution of two food powders, maltodextrin and skim milk, was studied by means of isothermal solution calorimetry. The effects of the moisture content and the physical state of the samples were investigated. A reduced exothermic response was found as the moisture content of the samples increased. It was shown that this effect is reversible upon re-drying of the solid, unless crystallization occurs. In the skim milk powder, crystallization of lactose occurred, leading to a less exothermic response. In addition, the dissolution kinetics of single particles was followed in situ with real time video acquisition and a novel image analysis technique. The data showed a significant effect of the physical state of the powder on the dissolution kinetics. Fully amorphous skim milk powder dissolved significantly faster than the recrystallized counterpart. A clear relation was observed between the physical state of the powders, their thermodynamic response and the dissolution kinetics.     

Simulations on field uniformity in a triangular reverberation chamber

This article presented the results of an electromagnetic field analysis inside a rectangular and triangular reverberation chamber being attached to the Schroeder Quadratic Residue Diffusers (QRD). Simulation results showed that a triangular chamber, which had more mode distribution than the rectangular chamber in the defined volume, had advantages of producing improved field uniformity. © 2002 Wiley Periodicals, Inc. Int J RF and Microwave CAE 12: 198–205, 2002.     

Diffusion Bonding of Microduplex Stainless Steel and Ti Alloy with and without Interlayer: Interface Microstructure and Strength Properties

The interface microstructure and strength properties of solid state diffusion bonding of microduplex stainless steel (MDSS) to Ti alloy (TiA) with and without a Ni alloy (NiA) intermediate material were investigated at 1173 K (900 °C) for 0.9 to 5.4 ks in steps of 0.9 ks in vacuum. The effects of bonding time on the microstructure of the bonded joint have been analyzed by light optical microscopy and scanning electron microscopy in the backscattered mode. In the direct bonded joints of MDSS and TiA, the layer-wise σ phase and the λ + FeTi phase mixture were observed at the bond interface when the joint was processed for 2.7 ks and above holding times. However, when NiA was used as an intermediate material, the results indicated that TiNi₃, TiNi, and Ti₂Ni are formed at the NiA-TiA interface, and the irregular shaped particles of Fe₂₂Mo₂₀Ni₄₅Ti₁₃ have been observed within the TiNi₃ intermetallic layer. The stainless steel-NiA interface is free from intermetallics and the layer of austenitic phase was observed at the stainless steel side. A maximum tensile strength of ~520 MPa, shear strength of ~405 MPa, and impact toughness of ~18 J were obtained for the directly bonded joint when processed for 2.7 ks. However, when nickel base alloy was used as an intermediate material in the same materials, the bond tensile and shear strengths increase to ~640 and ~479 MPa, respectively, and the impact toughness to ~21 J when bonding was processed for 4.5 ks. Fracture surface observations in scanning electron microscopy using energy dispersive spectroscopy demonstrate that in MDSS-TiA joints, failure takes place through the FeTi + λ phase when bonding was processed for 2.7 ks; however, failure takes place through σ phase for the diffusion joints processed for 3.6 ks and above processing times. However, in MDSS-NiA-TiA joints, the fracture takes place through NiTi₂ layer at the NiA-TiA interface for all bonding times.     

Novel bioconversion of sodium glutamate to γ-poly-glutamic acid and γ-amino butyric acid in a mixed fermentation using Bacillus subtilis HA and Lactobacillus plantarum K154

Both γ-poly-glutamic acid (γ-PGA) and γ-amino butyric acid (GABA) were produced from sodium glutamate in a mixed fermentation. A culture broth was obtained using a defined medium including 3% glutamate and Bacillus subtilis HA for 3 days at 42°C, with 1.20×10⁸ CFU/mL viable cells, a 0.46 Pa·sⁿ consistency index, and a 1.94% mucilage content. In a second fermentation using Lactobacillus plantarum K154 at 37°C for 3 days, 1.29% of the remaining glutamic acid in the viscous culture broth was converted to 0.86% GABA. Glutamic acid in the first culture broth fortified with 5% skim milk was completely converted to GABA. The final co-cultured broth had 0.48% GABA, a 0.294% tyrosine content, and viable cells of 1.06×10⁹ CFU/mL (L. plantarum K154) and 5.42×10⁵ CFU/mL (B. subtilis HA). Serial co-culturing of these two bacteria can provide novel ingredients fortified with γ-PGA, GABA, peptides, and probiotics.     

Oxidatively modified LDL and atherosclerosis: An evolving plausible scenario

Much evidence has accumulated that implicates the oxidative modification of low‐density lipoprotein (LDL) in the early stages of atherogenesis. The antioxidant nutrients alpha‐tocopherol, ascorbic acid, and beta‐carotene have been shown to inhibit in vitro LDL oxidation. In addition, they have been shown to increase the resistance of LDL to oxidation when given to animals and humans. Because plasma levels of these nutrients can be increased by dietary supplementation with minimal side effects, they may show promise in the prevention of coronary artery disease.     

Welfare,performance and meat quality of fattening pigs in alternative housing and management systems: a review

Conventional husbandry systems for pork production are scrutinized by members of the general public as well as the scientific community. As a response, alternative forms of pig production, such as outdoor housing, organic farming and environmental enrichment are gaining interest. The question arises whether these production systems are indeed able to improve the welfare and health status of the animals, and whether these production systems alter production characteristics and meat or carcass traits. Measures of poor welfare have been described, but evaluating overall welfare is difficult. Certain parameters of alternative housing will improve welfare in some ways but, simultaneously, other welfare problems are inflated, and the weighting of each of these problems is very subjective. Alternative housing systems allow pigs to display species‐specific behaviour and decrease the occurrence of abnormal behaviours by acting on several parameters: indoor versus outdoor housing, floor space/density, floor type, and provision of bedding or other types of environmental enrichment. Evaluating alternative housing systems should be done by looking at all the welfare‐improving factors and the cost of alleviating welfare‐decreasing problems in a given production system. Data in the literature on growth, meat and carcass traits in alternative production systems, are inconsistent, indicating that other factors can play an important role. However, as equal, or in some cases even better, performance can be attained in certain production systems that meet concerns of animal welfare scientists and members of the general public, alternative production forms may be considered preferable. Copyright © 2005 Society of Chemical Industry     

Putting the poorest farmers in control of disseminating improved wheat seed: a strategy to accelerate technology adoption and alleviate poverty in Bangladesh

This paper reports on a ‘bottom-up’ system of wheat seed technology transfer that was piloted in north–west Bangladesh with 45 mainly marginal (food insecure) farming families during the 2004–2005 wheat season, then scaled out to a further 545 mainly marginal, farming families during the 2006–2007 season. The system was devised following a survey which indicated that such farmers can obtain a 52% increase in wheat grain yield and extra income by switching from the old Kanchan variety to the newer, heat and disease-tolerant Shatabdi variety. The bottom-up wheat seed dissemination system involved the creation of an enabling environment which allowed poor and ultra-poor farmers to store and sell selected seed of recently-released wheat varieties that they produced in 20 decimal (0.08 ha) plots. During the pilot phase of the project in 2005, farmers produced 7, 976 kg of grain and more than 50% of this was selected as high quality seed, stored during the monsoon season and marketed to other farmers just prior to the following wheat season. This seed was sold at Tk25–30/kg and realised profits averaging Tk3,002 (€38.49; exchange rate was 78:1 in October 2005) per household. In 2007, the seed price had risen to Tk33–50/kg and a larger group of farmers produced, stored and marketed 168,800 kg of high quality wheat seed, which realised profits averaging Tk5,080, equivalent to €51 (exchange rate was 99.6:1 in October 2007), per household. This bottom up seed production and dissemination system met the wheat seed requirements of more than 1,400 neighbouring farmers in areas with a deficit of wheat seed for planting, and enabled poor and ultra-poor farmers to earn more than 50% of the income they needed to cross the local poverty line.

Effect of processing conditions on inversion layer mobility and interface state density in 4H−SiC MOSFETs

N-channel, inversion mode MOSFETs have been fabricated on 4H−SiC using different oxidation procedures, source/drain implant species and implant activation temperature. The fixed oxide charge and the field-effect mobility in the inversion layer have been extracted, with best values of 1.8×10¹² cm⁻² and 14 cm²/V-s, respectively. The interface state density, D_it close to the conduction band of 4H−SiC has been extracted from the subthreshold drain characteristics of the MOSFETs. A comparison of interface state density, inversion layer mobility and fixed oxide charges between the different processes indicate that pull-out in wet ambient after reoxidation of gate oxide improves the 4H−SiC/SiO₂ interface quality.     

Examining the ecological consequences of restoring flow intermittency to artificially perennial lowland streams: Patterns and predictions from the Broken—Boosey creek system in northern Victoria,Australia

The reinstatement of natural flow regimes is a rapidly emerging issue in river restoration worldwide. In northern Victoria, Australia, efforts are presently underway to restore a natural, intermittent flow regime to several streams which have received perennial diversions for both irrigation and stock and domestic water‐supplies for over 100 years. A pipeline to deliver water to landholders will significantly reduce transmission losses throughout the system allowing irrigation canals and diversion weirs to be decommissioned. The motivation for flow alteration in this system lies primarily in reducing inefficiencies in water delivery which, in turn, will be used to meet escalating demands on water resources. The ecological impact of the flow regime shift on these streams is likely to be substantial. This study utilized an existing artificial hydrological gradient (from perennial to intermittent) in two creek systems, to explore relationships between flow regime and a range of ecological variables. These data provide a benchmark against which to assess ecological changes once flow has been altered and form the basis for predicting changes that can assist future management decisions. Data collected from 10 sites across a strong hydrological gradient detected clear differences in geomorphology, water quality and biotic assemblages (macrophytes, macroinvertebrates and fish). By examining the relationship between flow regime and the distribution of biota we identify both the positive and negative outcomes of restoring naturally intermittent flow regimes within artificially perennial lowland streams. The reinstatement of intermittent flow regimes in artificially perennial streams will continue in many parts of the world as water delivery via these systems becomes increasingly uneconomical. While flow restoration may in principle be regarded as a positive step, these findings emphasize the need to consider fully the ecological consequences of restoring historical hydrological regimes to streams within the context of other human induced catchment disturbances. Copyright © 2009 John Wiley & Sons, Ltd.